Today: 6 May
parts yet to receive: propeller
coding done:
ACV:tested PWM and motors
tested RFID, works completely.
written Security chip State Machine
written Receive part of State Machine on Main PIC
CVC:
written State Machine. Currently Testing
Xbee:
testing. don't yet know if they work
To do:
start soldering bigger circuits (if any)
start prototyping (after Matt's exam)
Things to buy/get:
larger circuit board, wires?
a box to keep all our material in place
Small Snippets of Code that may be required to check the Receive State Machines:
A code which sends a fixed formatted message from e128
a code which sends a fixed formatted message from the pic
Aims for next couple of days:
protoyping after Matt's exam finishes tomorrow
get Xbee working (hopefully tonite)
Get ACV and CVC state machines working (hopefully by tmrw nite)
We have to get this done by Monday, 9 May. 10 May is the checkpt.
Attached is an almost final draft of the protocol decided by the Comm Comm.
parts yet to receive: propeller
coding done:
ACV:tested PWM and motors
tested RFID, works completely.
written Security chip State Machine
written Receive part of State Machine on Main PIC
CVC:
written State Machine. Currently Testing
Xbee:
testing. don't yet know if they work
To do:
start soldering bigger circuits (if any)
start prototyping (after Matt's exam)
Things to buy/get:
larger circuit board, wires?
a box to keep all our material in place
Small Snippets of Code that may be required to check the Receive State Machines:
A code which sends a fixed formatted message from e128
a code which sends a fixed formatted message from the pic
Aims for next couple of days:
protoyping after Matt's exam finishes tomorrow
get Xbee working (hopefully tonite)
Get ACV and CVC state machines working (hopefully by tmrw nite)
We have to get this done by Monday, 9 May. 10 May is the checkpt.
Attached is an almost final draft of the protocol decided by the Comm Comm.
parts yet to receive: propeller
ReplyDeletecoding done:
ACV:tested PWM and motors
completed: SC (PIC2), RFID(PIC3), Receive UART (Xbee)(PIC1)
CVC:
written State Machine. Currently Testing. TX works. RC should work?
Xbee:
definitely don't work. Jackie will build and test new ones on sunday night.
To do:
start soldering bigger circuits (if any)
start prototyping (after Matt's exam)
Things to buy/get:
larger circuit board, wires? (Radioshack, spdl?)
a box to keep all our material in place (Matt)
Small Snippets of Code that may be required to check the Receive State Machines:
a code which sends a fixed formatted message from the pic?
Aims for next couple of days:
protoyping after Matt's exam finishes tomorrow
get Xbee working (hopefully tonite)
Get ACV and CVC state machines working (hopefully by tmrw nite)
We have to get this done by Monday, 9 May. 10 May is the checkpt.